-
Phone
18660015766
-
Address
Bianjia Village, Shahe Town, Laizhou City
Product Categories
- Fully automatic hydraulic cutter
- Hydraulic screen changer head
- Electromagnetic heater
- Float sink
- Roll cutter granulator
- PET production line
- Granulator head
- Particle storage tank
- Environmentally friendly burning net furnace
- Smoke treatment machine
- Automatic slag discharge machine head
- Granulator screw barrel
- Plastic pelletizing machine
Yantai Tonglei Machinery Co., Ltd
Low pressure modified plastic granulation unit (export type)
NegotiableUpdate on 11/29
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The main engine of the low-pressure modified plastic granulation unit (export type) is the extruder, which consists of an extrusion system, a transmission system, and a heating and cooling system
Product Details
The main engine of the low-pressure modified plastic granulation unit (export type) is the extruder, which consists of an extrusion system, a transmission system, and a heating and cooling system. Vigorously develop renewable resources and turn waste into treasure.
As a device for crushing materials, any operational error can greatly pose a danger. So it is necessary to operate safely and avoid danger. For detailed operations, the following procedures should be followed.
1. After starting and reaching normal operation, uniform and continuous feeding of crops can be allowed.
2. During the entire homework period, pay attention to the motor, thresher speed, sound, and bearing temperature.
3. When feeding, the operator should stand on one side of the feeding port, tie their clothes tightly, and wear a mask and work cap.
4. When feeding, pay attention to whether there are hard objects such as stones, sickles, tool screws, etc. in the grains to avoid damaging the machine and causing personal accidents.
As a device for crushing materials, any operational error can greatly pose a danger. So it is necessary to operate safely and avoid danger. For detailed operations, the following procedures should be followed.
1. After starting and reaching normal operation, uniform and continuous feeding of crops can be allowed.
2. During the entire homework period, pay attention to the motor, thresher speed, sound, and bearing temperature.
3. When feeding, the operator should stand on one side of the feeding port, tie their clothes tightly, and wear a mask and work cap.
4. When feeding, pay attention to whether there are hard objects such as stones, sickles, tool screws, etc. in the grains to avoid damaging the machine and causing personal accidents.
5. The low-pressure modified plastic granulation unit (export type) is not allowed to hang belts, inject oil, clean and troubleshoot during operation.
The above is a detailed introduction about Tags: Low pressure modified plastic granulation unit (export type) manufacturer, low pressure modified plastic granulation unit (export type) price, low pressure modified plastic granulation unit (export type) installation, low pressure modified plastic granulation unit (export type) commissioning, low pressure modified plastic granulation unit (export type) processing, low pressure modified plastic granulation unit (export type) production, low pressure modified plastic granulation unit (export type) manufacturing, low pressure modified plastic granulation unit (export type) cost, low pressure modified plastic granulation unit (export type) which is good
Regional products:
Regional products:
