Large single station blow molding machine (25L 50L 80L 160L 220L)

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Large single station blow molding machine (25L 50L 80L 160L 220L)

Product Details

Large single station blow molding machine (25L 50L 80L 160L 220L)

Introduction: The 20-200L fully automatic plastic hollow forming machine is equipped with computer control, variable frequency speed regulation, air cooling, water cooling, nitriding screw barrel with mixing section, mixing head, forced feeding tank, and storage cylinder head in a "first in first out" manner. The large hydraulic station controls injection, mold clamping, inflation, pre blowing, and mold oil cylinders. The small hydraulic station is equipped with a Japanese Muge servo wall thickness control system, which can be chosen by the demand side. Synchronous rod clamping machine hydraulic direct top type, with a robotic arm automatically taking out the product.
Parameters:

Screw diameter	Screw diameter	100mm
Screw length to diameter ratio (L/D)	Screw L/D ratio	25：1
Plasticization ability (maximum)	Max. plasticating capacity(PE)	180kg/h
Barrel heating section	Number of barrel heating zone	Zone 4
Heating section of storage cylinder barrel	Number of Material tank zone	Zone 4
Storage tank capacity kg	The volume of material tank ( kg)	8kg
distance between tie bars	Distance of centre of the pull rod	900mm×1200mm
Maximum template spacing	Max. space between platens	1500mm
Locking force (maximum)	Clamping force	25KN
Maximum width of mold	Max.mold dim.	800mm
Number of empty loops per minute	Empty number of times of circulation of each minute	2 times
Main motor power	The electrial machinery merit rate	30KW
Oil pump motor power	Extruder driving power	37.5KW (30KW for large stations, 7.5KW for small stations)
Power	Heating power	18KW
Dimensions (length x width x height)	The mould size outside（L×W×H）	5000×2000×3800
Total Quality	The machine weight(T)	12.8T