KRACHT indicator supplier

KRACHT indicator AS8-I-24-ZMIt is one of the components of the automatic detection device. Used to indicate, record, or accumulate measurement results from a primary instrument. Secondary instruments are instruments installed on control screens that are far away from process pipelines or equipment. Used to indicate, record, or accumulate measurement results from a primary instrument. Usually powered by a power source, there are two forms of indication: analog or digital. Clear indication and high accuracy

KRACHT indicator AS8-I-24-ZMMain electrical performance parameters:

Normal working conditions:

1. Power supply: default value 220V ± 10% 50HZ ± 5%; Power consumption of approximately 5W (high reliability TM power supply)

(Switching power supply type 90-260V 50-60HZ power consumption of about 5W)

Customization of power supply specifications such as AC380V and DC24V is available

2. Environmental temperature: 0-50 ℃

3. Environmental humidity: ≤ 85% RH

4. Atmospheric conditions: In environments without corrosive gases or dust

5. External magnetic field: ≤ 400A/m

KRACHT indicator AS8-I-24-ZMIt is a display and control device used for dynamic flow and volume measurement. The setting can be completed through three buttons, which can be seen after removing the panel, or can be set through a film keyboard in the F specification.

Advantages and Features:

1. The sensing element has no movable parts and a simple and sturdy structure;

2. The application range and adaptability are very wide. Fluid media in general industrial processes, including liquid, gas, and steam, have a diameter range (DN15 or above) and can be applied in various working states (high, low temperature, normal pressure, high pressure). It can be said that its application range is comparable to that of orifice flow meters.

3. High accuracy, total measurement can reach 0.2% R;

4. Wide range, 4:1-15:1 to 30:1;

5. Can solve difficult flow measurement problems, such as measuring dirty fluids containing impurities (particles); Crude oil, wastewater, high-temperature residual oil, slurry, caustic soda solution, asphalt, etc;

6. High sensitivity, capable of measuring small flow rates, with flow velocities as low as 0.08m/s;

7. Used for fluids with small diameters (DN15-DN50) and low Reynolds numbers (Red=103-5 × 103), it can compensate for situations where standard throttling devices are difficult to apply, such as small diameter steam flow measurement;

8. Can adapt to the measurement of high parameter fluids, with pressures up to tens of MPa and temperatures up to 450 ℃;

9. Can be used for measuring bidirectional fluid flow;

10. The pressure loss is relatively low, about half of the standard orifice plate;

11. Strong ability to resist interference from upstream flow blocking components, with a length of 5-10D for the straight pipe section on the upstream side generally sufficient; 12. Dry (hanging weight method) verification can be adopted to facilitate periodic verification for users;

13. Direct reading instruments do not require external energy, are clear and easy to operate, and can also output standard signals (pulse frequency or current signals);

14. The instrument has a high cost performance ratio and is an economical flowmeter;

15. Easy to install and maintain.

Common models of Clark indicator:

POWERindicatorAS8-U-230+40M signal line

POWERindicatorAS8-I-24

POWERindicatorAS8-I-24-ZM

POWERindicatorAS8-U-24

POWERindicatorAS8-1-24-ZM+5m connecting wire

POWERindicatorAS8-I-24-ZM+5-meter connecting wire

POWERindicatorAS8-U-230+3M signal line

POWERindicatorAS8-U-24/F

POWERindicatorAS8-U-230+20M signal line

POWERindicatorAS8-U-230 (including plug)

POWERindicatorAS8-U-230 (without signal line)

POWERindicatorSD1-L-24 372383

POWERindicatorSD1-L-24

POWERindicatorSD1-I-24

POWERindicatorAS8-U-230

POWERindicatorAS8-U-230-F

POWERindicatorSD1-K-24

POWERindicatorAS8-I-230

POWERindicatorAS8-I-230+CABLE VC,20M LONG

POWERindicatorAS8-I-230 20M signal line

POWERindicatorAS8-U-24ZM/F

POWERindicatorAS8-U-230/F

POWERindicatorAS8-U-24+20M signal line

POWERindicatorSD1-I-24/V

POWERindicatorAS8-U-230+5M signal line

POWERindicatorAS-8-U-230 with film keyboard

POWERindicatorSD1-K-24/V

POWERIndicator+signal lineAS8-I-230-ZM+20M signal line