JC (R) series long shaft deep well pump

This series of pumps has novel structure, advanced hydraulic model, no hump in performance curve, wide efficient area, and an average efficiency of 4-8% higher than J and JD deep well pumps. It is a new generation of energy-saving water lifting equipment. Suitable for industrial and mining enterprises, urban water supply and drainage, groundwater pumping, and household irrigation and drainage. By replacing the relevant materials, it is suitable for use as high lift drainage, sewage pumps, and process pumps in power plants and chemical plants. It can also be specially designed as a special water pump that does not require pre lubrication during start-up, suitable for the needs of special environments. Flow rate: 5-900m3/h Head: 20-200m Motor power: 11-520KW Rated voltage: can be 380V, 660V Well diameter: 150-550mm Specific model parameters, please click the link below to download/upload/file/20200613/20200613171909_18357.docx

Product Introduction:

This series of pumps has novel structure, advanced hydraulic model, no hump in performance curve, wide efficient area, and an average efficiency of 4-8% higher than J and JD deep well pumps. It is a new generation of energy-saving water lifting equipment. Suitable for industrial and mining enterprises, urban water supply and drainage, groundwater pumping, and household irrigation and drainage. By replacing the relevant materials, it is suitable for use as high lift drainage, sewage pumps, and process pumps in power plants and chemical plants. It can also be specially designed as a special water pump that does not require pre lubrication during start-up, suitable for the needs of special environments.

Flow rate: 5-900m3/h

Lift: 20-200m

Motor power: 11-520KW

Rated voltage: can be 380V, 660V

Well diameter: 150-550mm

Main purpose:

JC type long shaft deep well pump is suitable for extracting non corrosive clean water from water wells at room temperature, and is widely used in industrial and mining enterprises, urban water supply, and farmland irrigation. The JCR type long axis geothermal deep well pump is suitable for the extraction of medium and low temperature groundwater below 100oC. It also has application fields for power plants, cotton mills, water plants, and petrochemical enterprises. Long axis (geothermal) deep well pump.

serial number	Model	traffic(m3/h)	head （m）	Supporting power（kw）	Rotational speed（r/min）	efficiency （%）	Maximum outer diameter underground（mm）
1	150JC(R)20-9×4	20	36	4	2900	67	143
2	150JC(R)20-9×5		45	5.5
3	150JC(R)20-9×6		54	5.5
4	150JC(R)20-9×7		63	7.5
5	150JC(R)20-9×8		72	7.5
6	150JC(R)20-9×9		81	11
7	150JC(R)20-9×10		90	11
8	150JC(R)20-9×12		108	11
9	150JC(R)20-9×14		126	15
10	150JC(R)20-9×16		144	15
11	150JC(R)20-9×18		162	18.5
12	150JC(R)32-9×4	32	36	5.5	2900	67	143
13	150JC(R)32-9×5		45	7.5
14	150JC(R)32-9×6		54	11
15	150JC(R)32-9×7		63	11
16	150JC(R)32-9×8		72	15
17	150JC(R)32-9×9		81	15
18	150JC(R)32-9×10		90	15
19	150JC(R)32-9×12		108	18.5
20	150JC(R)32-9×14		126	18.5
21	150JC(R)32-9×16		144	22
22	150JC(R)32-9×18		162	25
23	150JC(R)50-6.5×3	50	19.5	5.5	2900	70	143
24	150JC(R)50-6.5×4		26	7.5
25	150JC(R)50-6.5×6		38	11
26	150JC(R)50-6.5×8		52	15
27	150JC(R)50-6.5×10		65	15
28	150JC(R)50-6.5×12		78	18.5
29	150JC(R)50-6.5×14		91	22
30	150JC(R)50-6.5×16		104	25
31	150JC(R)50-6.5×18		117	30
32	200JC(R)40-21×1	40	21	5.5	2900	75	181
33	200JC(R)40-21×2		42	7.5
34	200JC(R)40-21×3		63	11
35	200JC(R)40-21×4		84	15
36	200JC(R)40-21×5		105	18.5
37	200JC(R)40-21×6		126	22
38	200JC(R)40-21×7		147	25
39	200JC(R)40-21×8		168	30
40	200JC(R)50-24×1	50	24	5.5	2900	75	181
41	200JC(R)50-24×2		48	11
42	200JC(R)50-24×3		72	18.5
43	200JC(R)50-24×4		96	22
44	200JC(R)50-24×5		120	25
45	200JC(R)50-24×6		144	30
46	200JC(R)50-24×7		168	37
47	200JC(R)63-21×1	63	21	7.5	2900	75	181
48	200JC(R)63-21×2		42	15
49	200JC(R)63-21×3		63	18.5
50	200JC(R)63-21×4		84	22
51	200JC(R)63-21×5		105	30
52	200JC(R)63-21×6		126	37
53	200JC(R)80-22×1	80	22	7.5	2900	75	181
54	200JC(R)80-22×2		44	15
55	200JC(R)80-22×3		66	22
56	200JC(R)80-22×4		88	30
57	200JC(R)80-22×5		110	37
58	250JC(R)110-14×1	110	14	7.5	2900	75	230
59	250JC(R)110-14×2		28	15
60	250JC(R)110-14×3		42	22
61	250JC(R)110-14×4		56	30
62	250JC(R)110-14×5		70	37
63	250JC(R)130-16×1	130	16	11	2900	75	230
64	250JC(R)130-16×2		32	18.5
65	250JC(R)130-16×3		48	30
66	250JC(R)130-16×4		64	37
67	300JC(R)90-15×1	90	15	5.5	1475	78	320
68	300JC(R)90-15×2		30	11
69	300JC(R)90-15×3		45	18.5
70	300JC(R)90-15×4		60	22
71	300JC(R)90-15×5		75	30
72	300JC(R)90-15×6		90	37
73	300JC(R)90-15×7		105	45
74	300JC(R)90-15×8		120	45
75	300JC(R)110-17×1	110	17	11	1475	78	320
76	300JC(R)110-17×2		34	18.5
77	300JC(R)110-17×3		51	25
78	300JC(R)110-17×4		68	37
79	300JC(R)110-17×5		85	45
80	300JC(R)110-17×6		102	55
81	300JC(R)110-17×7		119	55
82	300JC(R)150-14×1	150	14	11	1475	80	295
83	300JC(R)150-14×2		28	18.5
84	300JC(R)150-14×3		42	25
85	300JC(R)150-14×4		56	37
86	300JC(R)150-14×5		70	45
87	300JC(R)150-14×6		84	55
88	300JC(R)150-14×7		98	75
89	300JC(R)150-14×8		112	75
90	300JC(R)180-17×1	180	17	15	1475	84	295
91	300JC(R)180-17×2		34	25
92	300JC(R)180-17×3		51	37
93	300JC(R)180-17×4		68	55
94	300JC(R)180-17×5		85	75
95	300JC(R)180-17×6		102	75
96	300JC(R)180-17×7		119	90
97	300JC(R)180-17×8		136	110
98	300JC(R)220-13.5×1		13.5	15	1475	75	295
99	300JC(R)220-13.5×2		27	25
100	300JC(R)220-13.5×3		40.5	37
101	300JC(R)220-13.5×4		54	55
102	300JC(R)220-13.5×5		67.5	75
103	300JC(R)220-13.5×6		81	75
104	300JC(R)220-13.5×7		94.5	90
105	300JC(R)220-13.5×8		108	110
106	400JC(R)370-16×1	370	16	30	1475	80	346
107	400JC(R)370-16×2		32	55
108	400JC(R)370-16×3		48	75
109	400JC(R)370-16×4		64	110
110	400JC(R)370-16×5		80	132
111	400JC(R)370-16×6		96	160
112	450JC(R)550-27×1	550	27	75	1475	80	430
113	450JC(R)550-27×2		54	132
114	450JC(R)550-27×3		81	185
115	450JC(R)550-27×4		108	280
116	450JC(R)550-27×5		135	315*
117	500JC(R)650-32×1	650	32	90	1475	80	480
118	500JC(R)650-32×2		64	180
119	500JC(R)650-32×3		96	250
120	500JC(R)650-32×4		128	350*
121	500JC(R)650-32×5		160	400*
122	500JC(R)900-30×1	900	30	110	1475	80	480
123	500JC(R)900-30×2		60	225
124	500JC(R)900-30×3		90	315*
125	500JC(R)900-30×4		120	400*
126	500JC(R)900-30×5		150	560
127	550JC(R)125020×2	1250	40	225	1475	82	530
128	550JC(R)125020×3		60	315*
129	550JC(R)125020×4		80	400*
130	550JC(R)125020×5		100	560
131	550JC(R)150022×2	1500	44	280	1475	82	530
132	550JC(R)150022×3		66	400*
133	550JC(R)150022×4		88	560
134	550JC(R)150022×5		110	630
Note: with*Matching with others6KVor10KVHigh voltage machine. Our company can provide deep well pumps with flow rates and head different from those in the above table. Our company can provide deep well pumps made of various materials such as ductile iron, copper, and special materials such as 316 and 304. Due to continuous technological advancements, product specifications may change at any time without prior notice.