Imported adhesive tape cutting machine RT-7000

Features of imported adhesive tape cutting machine: 1. No roller design 2. Maximum cutting width of 60mm 3. Memory function (six different length requirements can be freely set before operation) 4. Easy fixation of film through elastic film auxiliary shaft 5. Preset, cycle and operation counting function 6. Two rolls of tape can be used at the same time 7. Protective device

Imported adhesive tape cutting machineFeatures:
1. No roller design
2. The maximum cutting width is 60mm
3. Memory function (six different length requirements can be freely set before homework)
4. The film can be easily fixed through the elastic film auxiliary shaft
5. Preset, loop, and job counting functions
6. Two rolls of tape can be used at the same time
7. Protective device, with a safety barrier added at the cutting edge
8. Accurate numerical control of cutting length
9. No need to adjust the thickness of the tape
10. Built in pliers, lubricating oil, and partitions for easy operation
11. The imported adhesive tape cutting machine is made of anti-static ABS material
12. To improve safety, even if the blockage is cleared after the warning device is activated and the adhesive tape machine is paused, the tape cutting machine will not immediately operate. It is necessary to press the start button again before it can be used normally

Imported adhesive tape cutting machine product description

Cutting length:	5-999mm
Tape width:	6-60mm
Maximum outer diameter:	300mm
Weight:	2.5kg
Applicable power supply:	220V/110V
Volume:	116(W)*140(H)*213(D)mm
Applicable tape:	Corresponding tapes: fine wire tape, reinforced tape, acetate fiber tape, fiberglass tape, double-sided tape, Normex, etc

Due to continuous product improvement, the above parameters may not be accurate. Please call for more information.

Product picture of imported adhesive tape cutting machine:

Imported adhesive tape cutting machine RT-7000