Imported Bacare modules

Austrian B&R Analog Input Module

Embedded industrial computer, also known as box computer or fanless industrial computer, is a more fashionable term. Its full English name is Embedded Industrial Computer. Embedded industrial control computer, in layman's terms, is a compact computer designed specifically for industrial sites.

The structure of embedded industrial control computers can be divided into five types

1. Passive base plate

The slots of the passive backplane are composed of multiple slots for ISA and PCI buses. The number and location of ISA or PCI slots can be selected according to the needs. The board has a four layer structure, with the middle two layers being the ground layer and the power layer. This structure can reduce the mutual interference of logic signals on the board and lower the power impedance. The motherboard can accommodate various types of cards, including CPU cards, display cards, control cards, I/O cards, etc.

2. CPU card

There are various types of CPU cards for IPC, which can be divided into long cards and half long cards according to their size. Depending on the processor, they can be divided into 386, 486, 586, PII, and PIII motherboards, and users can freely choose according to their needs. Its main characteristics are: working temperature 0-60 ℃; Equipped with a "watchdog" timer; Low power consumption, at 5V/2.5A.

3. Industrial power supply

For AT switching power supply, the average operating time reaches 250000 hours.

4. All steel chassis

The all steel chassis of IPC is designed according to standards, resistant to impact, vibration, and electromagnetic interference, and can be equipped with a passive motherboard compatible with PC bus inside.

5. Other accessories:

The other accessories of IPC are basically compatible with PCs, mainly including CPU, memory, graphics card, hard drive, floppy drive, keyboard, mouse, optical drive, monitor, etc.

advantage

1. The product has good functional adaptability, almost matching the functions of the tested controlled object, and has a certain degree of scalability but not primarily for the purpose of expansion. Therefore, the product has a high cost-effectiveness.

2. The miniaturization of equipment is one of the main manifestations, which is reflected in compact design. There are no standards for structural design. Reasonable utilization of external interfaces and installation space should be fully considered.

3. The reliability requirement is very high. On the basis of meeting the reliability design of electrical functions, reliability design contents such as heat dissipation design, electromagnetic compatibility design, dust and waterproof design, and anti vibration design should be carefully considered

X20DM9324 X20 digital mixing module, 8 inputs, 24VDC, leakage type, configurable input filter, 4 outputs, 24VDC, 0.5 A, 1-wire connection technology

X20AI1744 1 DMS input, 24 bit resolution converter, external filter model

X20AI1744-3 X20 analog input module, 1-channel full bridge strain input, 24 bit conversion resolution, 5 Hz input filter

X20AI2437 X20 analog input module, 2-channel input, 4-20 mA, 16 bit resolution, each channel electrically isolated and equipped with sensor power supply

X20AI2438 X20 analog input module, 2-channel input, 4-20 mA, 16 bit resolution, electrically isolated for each channel and equipped with sensor power supply, supports HART protocol X20AI2622 X20 analog input module, 2 inputs, ± 10 V/0-20 mA/4-20 mA, 12 bit resolution, configurable input filtering

X20AI2632 X67 Analog Input Module, 2 inputs, ± 10 V/0-20 mA, 16 bit resolution, configurable input filtering

X20AI2632-1 X20 Analog Input Module, 2 inputs, ± 11 V/0-22 mA, 16 bit resolution, configurable input filtering

X20AI2636 X20 Analog Input Module, 2-channel input, ± 10 V/0-20 mA, 16 bit resolution, configurable input filter, oversampling function

X20AI4622 X20 Analog Input Module, 4 inputs, ± 10 V/0-20 mA/4-20 mA, 12 bit resolution, configurable input filtering

X20AI4632 X20 Analog Input Module, 4 inputs, ± 10 V/0-20 mA, 16 bit resolution, configurable input filtering

X20AI4632-1 X20 Analog Input Module, 4 inputs, ± 11 V/0-22 mA, 16 bit resolution, configurable input filtering

X20AI4636 X20 Analog Input Module, 4-channel input, ± 10 V/0-20 mA, 16 bit resolution, configurable input filter, oversampling function

X20AO2437 X20 analog output module, 2-channel output, 4-20 mA, 16 bit resolution, single channel electrical isolation

X20AO2438 X20 analog output module, 2-channel output, 4-20 mA, 16 bit resolution, electrically isolated for each channel, supports HART protocol

X20AO2622 X20 analog output module, 2 outputs, ± 10 V/0-20 mA, 12 bit resolution

X20AO2632 X20 analog output module, 2 outputs, ± 10 V/0-20 mA, 16 bit resolution

X20AO2632-1 X20 Analog Output Module, 2-channel output, ± 11 V/0-22 mA, ± 15 bit resolution

X20AO4622 X20 analog output module, 4 outputs, ± 10 V/0-20 mA, 12 bit resolution

X20AO4632 X20 analog output module, 4 outputs, ± 10 V/0-20 mA, 16 bit resolution

X20AO4632-1 X20 analog output module, 4-channel output, ± 11 V/0-22 mA, ± 15 bit resolution

X20AO4635 X20 analog output module, 4 outputs, ± 10 V/0-20 mA, 16 bit resolution, low drift

X20AT2222 X20 temperature input module, 2 impedance measurement inputs for PT100 and PT1000, resolution of 0.1K, 3-wire connection technology

X20AT2311 X20 temperature input module, 2 impedance measurement inputs for PT100, resolution 1.0 mK, 4-wire connection technology

X20AT2402 X20 temperature input module, 2 thermocouple inputs, types J, K, N, S, resolution 0.1K

X20AT4222 X20 temperature input module, 4 impedance measurement inputs for PT100 and PT1000, resolution of 0.1K, 3-wire connection technology

X20AT6402 X20 temperature input module, 6 thermocouple inputs, types J, K, N, S, resolution 0.1K 232 X20ATA492 X20 temperature input module, 2 thermocouple inputs, types J, K, N, S, B, R, E, C, T, electrically isolated for each channel, 2x PT1000 inputs for terminal temperature compensation with terminal block X20TB1E, purchased terminal block separately.

X20ATC402 X20 temperature input module, 6 thermocouple inputs, types J, K, N, S, B, R, E, C, T, 2x PT1000 inputs for terminal temperature compensation with terminal block X20TB1E, purchased separately.

X20MM2436 X20 PWM motor bridge module, powered by 24-39 VDC ± 25% module, 2x PWM motor bridge, 3 A, 4 digital inputs can be configured as incremental encoders

X20MM3332 X20 digital module, 3 outputs 24 VDC full bridge, 3 A

X20MM4331 X20 digital module, 4 outputs 24 VDC half bridge, 3 A

X20MM4456 X20 PWM motor bridge module, powered by 24-48 VDC ± 25% module, 4x PWM motor bridge, 6 A, 4x4 digital inputs can be configured as incremental encoders

X20SM1426 X20 stepper motor module, 24 VDC power supply, 1x motor connection, 1 A, 1.2 A max, 4x digital input 24 VDC, leakage type, can be used as an incremental encoder

X20SM1436 X20 stepper motor module, 24-39VDC ± 25% power supply, 1x motor connection, 3 A, 3.5 A Max., 4x digital input 24 VDC, leakage type, can be used as an incremental encoder

X20SM3456 X20 stepper motor module, 24-48 VDC ± 25% power supply, 3 x motor connections, 6 A, 10 A Max., 9 x digital input 24VDC, leakage type, can be used as an incremental encoder

X20CM0985 X20 digital/analog hybrid module, multi-channel transmitter measurement/synchronization module, 5 × DO, 24VDC, 0.5A, source type, 1 relay 0.5A, 10x AI ± 415 V/120 V, 16 bit conversion resolution, 3x AI ± 5 A/1 A, 16 bit conversion resolution

X20CM1201 X20 combination module, 1x AB incremental encoder 24V, 4 digital inputs 24V, 4 channels 24V configurable as input or output, flexible digital control logic

X20CM6209 X20 diode array, 1 A, 40 V reverse voltage, no module status data

X20CM8281 X20 universal hybrid module, 4 output terminals, 24VDC, drain type, 1-wire connection technology, 2-channel digital output, 0.5 A, source type, 1-wire connection technology, 1 analog input, ± 10 V or 0-20 mA/4-20 mA, 12 bit resolution, 1 analog output, ± 10 V/0-20 mA, 12 bit resolution, 2 counters can be used as event counting or gate measurement

X20CM8323 X20 PWM module, 8 digital output terminals for electromechanical loads, continuous current of 0.6A, peak current of 2A, voltage monitoring, time detection conversion, status indicator LEDs

X20DS4387 X20 digital signal module, 4 x IO Link master station, can also be configured as 4 x digital input or output channels, 3-wire connection technology X20PD0011 X20 power distribution, 12x GND, integrated micro fuse

X20PD0012 X20 power distribution, 12x 24 VDC, integrated fuse

X20PD0016 X20 power distribution, 5x GND, 5x 24 VDC, 1-way free power supply, integrated micro fuse

X20PD2113 X20 power distribution, 6x GND, 6x 24 VDC, integrated micro fuse

X20PS4951 X20 potentiometer power supply module, potentiometer voltage 4x ± 10V

X20CM1941 X20 rotary conversion module, 14 bit rotary conversion module input, ABR output can reach 10 bit

X20DC1176 X20 digital counter module, 1 channel ABR, 5 V, 250 kHz input frequency, 4x times, encoder monitoring

X20DC11A6 X20 digital counting module, 1 channel ABR, 5 V, 5 MHz input frequency, 4x times

X20DC1178 X20 digital counter module, 1 channel SSI, 5 V, 1 MBit/s, 32-bit, encoder monitoring

X20DC1196 X20 digital counter module, 1 channel ABR, 5 V, 250 kHz input frequency, 4x times

X20DC1198 X20 digital counter module, 1 channel SSI, 5 V, 1MBit/s, 32-bit

X20DC1376 X20 digital counter module, 1 channel ABR, 24 V, asymmetric, 100 kHz input frequency, 4x times, encoder monitoring

X20DC1396 X20 digital counter module, 1 channel ABR, 24V, 100kHz input frequency, 4x times

X20DC1398 X20 digital counter module, 1 channel SSI, 24V, 125MBit/s, 32-bit

X20DC1976 X20 digital counter module, 1 channel ABR, 5 V, asymmetric, 250 kHz input frequency, 4x times, encoder monitoring

X20DC2190 X20 digital quantity counting module, ultrasonic sensor, interface: EP start/stop, DPI/IP， 2 sensing rods, 4 path attachments

X20DC2396 X20 digital counter module, 2 channels ABR, 24V, 100kHz input frequency, 4x times

X20DC2398 X20 digital counter module, 2 channels SSI, 24V, 125MBit/s, 32 bi

X20DC2395 X20 digital counter module, 1xSSI encoder, 24V, 1xABR incremental encoder, 24V, 2xAB incremental encoder, 24V, 4x event counter or 2xPWM

X20DC4395 X20 digital counter module, 2xSSI encoder, 24V, 2xABR incremental encoder, 24V, 4xAB incremental encoder, 24V, 8x event counter or 4xPWM

X20DS1119 X20 digital quantity counting module, 3 digital quantity 5V (symmetrical) channels can be configured as input or output, 2 digital quantity 24V (asymmetrical) input channels, 2 event counters, a pair of universal counters can be used as A/B counters or up/down counters, linear motion generator (A/B; direction/frequency) with a reference pulse, SSI encoder

X20DS1319 X20 digital quantity counting module, 4 digital quantity outputs, 4 digital quantities can be configured as inputs or outputs, 2 event counters, a pair of universal counters can be configured as A/B counters or up/down counters, linear motion generator (A/B; direction/frequency) with 2 reference pulses, SSI encoder

X20DC1073 X20 digital quantity counting module, 1x sin/cos 1 VSS, 400 kHz, encoder monitoring, NetTime module

X20DS1828 X20 digital signal module, 1x Hiperface, NetTime module

X20DS1928 X20 digital signal module, 1x EnDat 2.1/2.2, NetTime module

X20DS4389 X20 digital signal module, 4 x digital inputs, 24 VDC, 4x digital outputs, 24 VDC, 0.1 A, oversampling I/O function, time triggered I/O function, NetTime module

X20BM23 X20 power base module, security code, internal I/O power supply and left phase isolation

X20BM26 X20 base module, security code, with node dip switch, connected to internal I/O power supply

X20BM33 X20 motherboard module, integrated with safety technology, connected to internal I/O power supply

X20TB52 X20 standard 12 core terminal block, integrated with safety technology

X20SL8000 X20 SafeLOGIC， Integrated security technology CPU standard, replaceable user RAM: memory key, 1 x POWERLINK V2 interface, controlled node, integrated 2 x hub, including power module, terminal block X20TB52, X20 locking board (left), purchased memory key separately

X20SL8001 X20 SafeLOGIC， Integrated security technology CPU plus, replaceable user RAM: memory key, 1 x POWERLINK V2 interface, controlled node, integrated 2 x hub, including power module, terminal block X20TB52, X20 locking board (left), additional purchase of memory key

X20SL8010 X20 SafeLOGIC (safety logic controller), safety CPU standard, SafeMC for up to 20 safety nodes or SafeMC nodes, replaceable application memory: memory key, 1 POWERLINK V2 interface, controlled node, integrated 2x hub, including power module, terminal block TB52, X20AC0SR1 X20 locking board (right), purchase memory key separately

X20SL8011 X20 SafeLOGIC (Safety Logic Controller), Safety CPU plus, SafeMC for up to 100 safety nodes or SafeMC nodes, 32 machine options, POWERLINK safety gateway, replaceable application memory: Memory key, 1 POWERLINK V2 interface, controlled node, integrated 2x hub, including power module, terminal block TB52, X20AC0SR1 X20 locking board (right), additional memory key purchase

Beijiale X67 series analog output module X67AM1223

Beijiale X67 series analog output module X67AM1323

Beijiale X67 series analog output module X67AO1223

Beijiale X67 series analog output module X67AO1323

Beijiale X67 series analog input module X67AI1223

Beijiale X67 series analog input module X67AI1323

Beijiale X67 series analog input module X67AI2744

Beijiale X67 series analog input module X67AM1223

Beijiale X67 series analog input module X67AM1323

Beijiale X67 series analog input module X67UM1352

Beijiale X67 series digital input/output module X67DM1321

Beijiale X67 series digital input/output module X67DM1321L08

Beijiale X67 series digital input/output module X67DM1321L12

Beijiale X67 series digital input/output module X67DM9331.L12

Beijiale X67 series digital input/output module X67UM1352

Beijiale X67 series digital output module X67DM1321

Beijiale X67 series digital output module X67DM1321L08

Beijiale X67 series digital output module X67DM1321L12

Beijiale X67 series digital output module X67DM9331.L12

Beijiale X67 series digital output module X67DO1332

Beijiale X67 series digital output module X67DO9332.L12

Beijiale X67 series digital output module X67DV1311.L08

Beijiale X67 series digital output module X67DV1311.L12

Beijiale X67 series digital output module X67MM2436

Beijiale X67 series digital output module X67SM2436

Beijiale X67 series digital output module X67SM4320

Beijiale X67 series digital output module X67UM1352

Beijiale X67 series digital input module X67DI1371

Beijiale X67 series digital input module X67DI1371.L08

Beijiale X67 series digital input module X67DI1371.L12

Beijiale X67 series digital input module X67DM1321

Beijiale X67 series digital input module X67DM1321L08

Beijiale X67 series digital input module X67DM1321L12

Beijiale X67 series digital input module X67DM9331.L12

Beijiale X67 series digital input module X67UM1352

Beijiale X67 series bus control module X67BC4321

Beijiale X67 series bus control module X67BC5321

Beijiale X67 series bus control module X67BC6321

Beijiale X67 series bus control module X67BC6321.L08

Beijiale X67 series bus control module X67BC6321.L12

Beijiale X67 series bus control module X67BC7321-1

Beijiale X67 series bus control module X67BC8321

Beijiale X67 series bus control module X67BC8321-1