ISR type hot water circulation pump

NegotiableUpdate on 04/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

ISR type hot water circulation pump

Product Details

Typical Uses

Transporting clear water and liquids with physical and chemical properties similar to water without solid particles

·Boiler hot water circulation

·Heating up

Characteristics of water pump

·Simple structure, reliable performance, easy to use and maintain

·Small size, light weight

·Good anti cavitation performance

·Low power consumption

STRUCTURE DESCRIPTION

·The ISR type hot water circulation pump has a wide range of universality, with a total of 140 specifications in the entire series, but only four shafts are used; Shafts, bearings, shaft seals, impeller fasteners, etc. of the same specification can be interchanged; There are only four types of suspension for the entire series of pumps

·Rear opening, there is no need to disassemble the suction and discharge pipelines when disassembling the pump cover and impeller

·The suspension is equipped with two ball bearings, which are lubricated with mechanical oil or grease

·The pump is directly driven by an electric motor through an elastic coupling

·The vortex chamber, feet, inlet flange, and outlet flange are cast as a whole

·High temperature resistant double end mechanical seal for shaft seals

performance parameter

·Inhalation caliber: 50-125 mm

·Discharge diameter: 32-100 mm

·Flow rate: 6.5-1112.1 m3/h

·Lift: 14-133 meters

·Speed: 1450/2900 r/min

·Temperature: ≤ 130℃

·Working pressure: The maximum operating pressure is 1.6MPa, and a 2.4MPa pressure test is conducted before leaving the factory

Tags:& Nbsp&nbspHot water circulation pump&nbspCirculating pump&nbspPipeline pump