How much does the PAC integrated fully automatic dosing device cost

Integrated automatic dosing deviceAdopting time program control, this control method does not require the support of instruments. The automatic dosing cycle, dosage, dosing time, and dosing frequency are set according to the operation needs of the system. In the future operation of the system, during the dosing cycle, the metering pump will automatically turn on for dosing, and the metering pump will turn off at the specified time; At the end of the discharge cycle, the metering pump stops adding medication. After the specified time has passed, the metering pump continues to operate to replenish the lost medication from the discharge, maintaining the system's drug content at a normal level. The metering pump is then turned off at the specified time.

Integrated automatic dosing deviceThe dosing device is a complete set of equipment that injects chemical solutions into various systems according to the process flow. The device can be divided into three categories according to the usage scenario.

1. Oilfield dosing device. Mainly used for injecting various chemicals such as coagulants, scale inhibitors, corrosion inhibitors, demulsifiers, etc. into the wellhead and other systems on the platform during oil extraction.

2. Boiler dosing device. It can be used for adding ammonia and hydrazine to boiler feedwater, condensate, shutdown protection, and adding phosphate to steam boilers. It is mainly used in power plants and power stations.

3. Water treatment dosing device. Add chemicals to tap water, wastewater, and sewage during the water treatment process. Mainly used for processes related to water supply and drainage treatment, environmental protection, etc. Such as waterworks, hotels, restaurants, swimming pools, sewage treatment plants, etc.

Notes:

1. Before installing the equipment, it is necessary to familiarize oneself with the equipment structure and the provided drawings. The foundation, equipment pipe opening orientation, and the docking position of each accessory should be verified according to the drawing requirements.

2. First, open the packaging box, remove the equipment from the box, and then proceed with on-site installation; Unpackaged equipment can be installed directly in place.

3. Install the equipment pipeline according to the inlet pipe, outlet pipe, and overflow drain pipe shown in the product installation diagram.

4. Remove the equipment and accompanying instruments from the packaging box, and install and connect them according to the product installation diagram when the instruments are intact.

5. This equipment is equipped with an electrical control cabinet (referring to equipment with conventional configuration). Users only need to connect the power cord to the wiring input terminal of the air switch in the electrical control cabinet.