How much does it cost to sell Bellmatic cylinders

Construction: The basic structure of this drum is to set a slit on the extruded aluminum material, and wrap steel wires at any interval at a right angle to the slit. Reduce pressure through the gap between the wires using a blower, and attach the transported object to the designated corner. Characteristics: 1. The total area of the contact part of the transported object adsorbed on the surface of the wire is about 5-10 times larger than that of traditional straws. Therefore, the power has increased several times compared to the old product, which can reduce the suction pressure of the blower. In addition, it can also reduce adsorption marks. 2. Attract from the gap between the wires, but due to the narrow slit width being greater than 4mm, dust and other debris fall off and adsorb, causing almost no blockage. 3. Because the diameter and spacing of the wire can be freely selected, it can further improve grip strength and solve the problem of adhesion marks. 4. In the slit type suction roller, the inner cylinder is not required due to the suction structure of flipping the inside of the drum side through one side and two side suction boxes. Instead, like previous products, there is no contact failure between the inner and outer cylinders caused by drum deformation due to temperature differences during use. 5. High power can reduce the attraction area. 6. That is to say, due to the option to choose a smaller roller diameter, GD 2 (inertia moment) can be reduced and the drive motor can be miniaturized. Usage: Various printing machines, rolling mills, coating machines, calendar machines, slit machines, laminating machines, fiber machinery, packaging machines, etc., used for cutting tension of feed rollers, thrust rollers, etc., can be used as tension cutting for various substrates (instead of threads), processing and handling lines for various plastic films, paper, metal foils, etc. Specification range: diameter ranging from 100mm to 480mm/length of 100m