High precision three-axis acceleration sensor price

The three-axis acceleration sensor integrates sensing, conversion, and transmission circuits for measuring vibration signals in the X, Y, and Z directions, and directly outputs 4-20mA standard current signals corresponding to these parameters. It can be connected to various general-purpose secondary instruments or computer digital acquisition and monitoring systems.

Technical Specifications:

1 Frequency range: 5-3K Hz (acceleration type), 5-2K Hz (velocity type)

Measurement range: 0-50g (P) or 0-200mm/s (RMS)

3 signal outputs: Three channels of 4-20mA (± 0.05mA)

4 Output impedance: ≤ 500 Ω

5 Working voltage: DC12-36V ± 10%

6 Wiring method: Two wire system

7 measurement directions: X Y Z

8. Operating environment: Temperature -30 ℃~100 ℃, relative humidity ≤ 90%

9. Dimensions: 45 * 75mm

10 Installation thread: M10 * 1.5 or magnetic seat

11 Weight: Approximately 500g

The three-axis acceleration sensor integrates sensing, conversion, and transmission circuits for measuring vibration signals in the X, Y, and Z directions, and directly outputs 4-20mA standard current signals corresponding to these parameters. It can be connected to various general-purpose secondary instruments or computer digital acquisition and monitoring systems.

Before using the vibration transmitter, check if the wiring is intact, and then fix the transmitter at the measured point;

2. Confirm that the working power supply of the vibration transmitter should be+24V ± 10% VDC;

3. When the vibration transmitter is powered on and there is no vibration, the output current should be around 4.00 mA;

4. When the tested machine vibrates, the output of the vibration transmitter should correspond to a linear 4-20mA current output;