High precision dual axis acceleration sensor price

Dual axis acceleration sensorUsing integrated acceleration sensors as detection components. Integrated acceleration sensor is composed of acceleration sensitive components, conversion, measurement, and amplification circuits fabricated by micro machining on a polycrystalline silicon. It adopts microelectronic processing technology and capacitive measurement principle, and can measure acceleration from DC to 2kHz within ± 1g to ± 50g. It has excellent stability, reliability, and strong resistance. The acceleration signal detected by the JX73ST integrated dual axis housing vibration temperature transmission sensor is subjected to low-pass filtering, secondary integration, peak to peak operation, and V/I conversion to output a standard 4-20mA vibration displacement peak to peak current signal.
JX73ST integrated dual axis housing vibration temperature transmission sensor has an internal temperature sensor, with a wide temperature measurement range and accurate and reliable temperature measurement.

Dual axis acceleration sensorTechnical indicators:
Power supply: Power supply+24VDC, not exceeding 32V
Working current:<50ma without output load>Output type: 4-20mA
Output load: 250 Ω, not exceeding 750 Ω
Temperature output range: 0-120 ℃
Temperature measurement accuracy: 1 ℃
Vibration displacement peak to peak range: 500 μ m
Large nonlinearity in vibration measurement: 2%
Vibration measurement frequency response: 5Hz~200Hz
Dimensions: 80 (L) × 80 (W) × 95 (H) mm, excluding height of connecting terminals
Weight: Approximately 500g

Output terminal wiring:
The JX73ST integrated dual axis chassis vibration temperature transmission sensor adopts a connector output, matched with a PG16 waterproof connector, and connected to a 1/2 "specification hose. The corresponding wiring for terminal numbers is as follows:
1 # -- Power supply+24V
2 # -- Public Area COM
3 # -- Temperature output Tout
4 # -- Horizontal X-direction Vibration Output ZDXout
5 # -- Vertical Z-direction vibration output ZDZout


Installation and use:
Installation base plate size 80 (L) × 80 (W)
Installation hole size is 8.3mm
Installation hole position size 60 (L) × 60 (W)
Installation measurement direction: The X direction is defined as the direction parallel to the installation base plate and the arrow mark * on the installation base plate (or label); Z direction is defined as the upward direction perpendicular to the installation base plate. G-2 Vibration Sensor KR-939B Fan Safety Operation Monitor, KR-939B3 Fan Safety Monitor, KR-939B4 Fan Safety Monitor, KR-939B4-4 Equipment Safety Monitor, KR-32 Dual Channel Equipment Safety Monitor, KR-34 Four Channel Equipment Safety Monitor, KR-939NCS Fan Speed and Frequency Meter