-
E-mail
13829686698@139.com
- Phone
-
Address
guangdongsheng shantoushi haojiangqu hepudadao
Product Categories
Guangdong Jinming Precision Machinery Co., Ltd
High barrier packaging film blow molding unit
NegotiableUpdate on 01/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Jinming ClassicX series blown film unit is a customized and high-capacity mid-range model launched by Jinming to optimize existing models. Based on standard configuration, it can be customized according to customers' actual production and processing needs and process conditions, meeting customers' high-quality production needs such as film uniformity control, film transparency, film stiffness and toughness, and film yield.
Product Details
Component Introduction
die head
The mold head is designed through simulation, using a streamlined flow channel design, *, to optimize the resin flow channel and distribution unit, which helps to obtain thin film thickness tolerances when processing different resins. By adopting a low profile die design, the melt flow performance is optimized, and the self-cleaning performance of the die is excellent, which can effectively shorten the conversion time during formula switching and reduce raw material loss.
Automatic wind ring
Jinming has developed a multi vent high-efficiency cooling air ring after years of dedicated research and development. The air outlet temperature of each point of the air ring is controlled by uniformly distributed heating units on the air duct, which can effectively adjust the thickness uniformity of the film bubble horizontally. It forms a closed-loop control with an online automatic film thickness measurement system to achieve automatic control of film thickness. The air ring is made of high-quality aluminum alloy, with side air intake, large air chamber, low air resistance of the distribution plate, and low pressure loss. The inner and outer air vents can be independently adjusted, and each vent has high air outlet accuracy. The vacuum lock has a large force on the external pulling of the membrane bubble, and the membrane bubble stability is good.
Type III winding
The winding device adopts a modular design and has multiple winding functions, which can adapt to winding materials with different characteristics. It can also adapt to the exchange of 3 or 6-inch winding shafts and has a pre acceleration function for winding shafts, which can reduce tension fluctuations during winding and provide high-quality winding. Equipped with automatic film cutting, automatic roll changing, automatic unwinding, automatic length counting, and fully automatic taper tension control. The fully automatic taper tension control system can provide feedback based on the surface tension of the measured film and achieve automatic tracking, improving the flatness of the film winding. Effectively reducing the labor intensity of manual labor, reducing the amount of waste generated during manual coil replacement, improving work efficiency, and enhancing safety performance.
