The HCM-W water-cooled industrial chiller is mainly used for mold cooling in plastic molding machinery. It can accurately control the mold temperature, shorten the injection molding cycle, accelerate product shaping, improve the surface smoothness of plastic products, reduce surface wrinkles and internal stress, and prevent product shrinkage and deformation. It is also suitable for electroplating industry, food industry, electronic manufacturing industry, dyeing industry, ultrasonic mechanical cooling and other fields.
Advantages of HCM-W water-cooled industrial chiller:
Cooling range 5 ℃ -35 ℃;
Stainless steel SUS304 insulated water tank;
P. I. D temperature control, accurate and reliable temperature control;
PC board fault indication, which can accurately detect abnormal faults when a fault occurs;
Adopting an independent anti freezing temperature controller to prevent icing;
Both the compressor and water pump are equipped with overload devices;
High and low voltage switch control, flexible and adjustable, precise protection of the compressor;
Hydrophilic jacketed condenser for better heat transfer efficiency;
Spiral shell and tube evaporator, with high heat transfer capacity and stable heat transfer effect;
R22 can be used as the refrigerant, or R410A can be selected as an environmentally friendly refrigerant.
| Model/Type | HCM-3W | HCM-4W | HCM-5W | HCM-8W | HCM-10W | HCM-12.5W | HCM-15W | HCM-20W | HCM-25W | HCM-30W | HCM-40W | HCM-50W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cooling capacity (KW)/(Kcal/hr) |
8 | 10 | 13.5 | 21 | 27 | 32 | 40 | 54 | 64 | 80 | 108 | 128 |
| 6800 | 8600 | 11500 | 18000 | 23000 | 27500 | 34500 | 46000 | 55000 | 68800 | 93000 | 110000 | |
| Compressor output power (HP) | 3 | 4 | 5 | 8 | 10 | 12.5 | 15 | 20 | 25 | 30 | 40 | 50 |
| refrigerant | R22/R410A | |||||||||||
| evaporator | Spiral shell tube | |||||||||||
| condenser | shell tube | |||||||||||
| Inlet water pipe | 1″ | 1″ | 1.5″ | 1.5″ | 2″ | 2″ | 2.5″ | 2.5″ | 3″ | 3″ | 3″ | 3″ |
| Water tank capacity (L) | 50 | 50 | 50 | 85 | 85 | 150 | 150 | 180 | 200 | 280 | 400 | 500 |
| Pump power (Kw) | 0.37 | 0.37 | 0.75 | 1.1 | 1.1 | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 4 | 4 |
| Maximum pump flow rate (L/min) | 50 | 50 | 80 | 150 | 150 | 250 | 250 | 350 | 350 | 350 | 550 | 550 |
| Maximum pump pressure (kg/c) | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.5 | 2.5 |
| Pipe outlet (inch) | ½″x4 | ½″x4 | ½″x4 | 1-½″ | 1-½″ | 2″ | 2″ | 2-½″ | 2-½″ | 2-½″ | 3″ | 3″ |
| Piping inlet (inch) | ½″x4 | ½″x4 | ½″x4 | 1-½″ | 1-½″ | 2″ | 2″ | 2-½″ | 2-½″ | 2-½″ | 3″ | 3″ |
| Water replenishment port (inch) | ½″ | |||||||||||
| Overflow port (inch) | ½″ | |||||||||||
| Weight (kg) | 180 | 190 | 220 | 280 | 290 | 350 | 400 | 800 | 900 | 1000 | 1500 | 1800 |
| External dimensions | ||||||||||||
| L(mm) | 1200 | 1200 | 1200 | 1250 | 1250 | 1400 | 1400 | 2000 | 2000 | 2000 | 2900 | 2900 |
| W(mm) | 600 | 600 | 600 | 790 | 790 | 880 | 880 | 980 | 980 | 980 | 1050 | 1050 |
| H(mm) | 960 | 960 | 960 | 1050 | 1050 | 1250 | 1250 | 1500 | 1500 | 1500 | 1750 | 1750 |
Note: The cooling capacity is measured at an outlet temperature of 12 ℃ and an ambient temperature of 30 ℃.
