Electric melting scraper

Performance and features:

EBefore fusion welding, it is necessary to remove the oxide layer and fix the pipe at the welding site. The electric melting scraper is used for this purposeA tool used to scrape off the oxide layer on the surface of the pipe before electric fusion connection.

EThe electric melting scraper has a practical plastic handle and carbon steel blades, and the four blades are interchangeableCan be used on all four sides.

EuseStep: Before welding the gas PE pipe electric fusion connection sleeve, variable diameter sleeve and other fittings to the pipe, it is necessary to first weld the area to be welded on the outer surface of the pipe

Make the mark and then scrape evenly along the direction of the pipe to form a uniform chip operation with a thickness of about 0.2mm. During welding, the operator

All scraping work in the welding area should be completed.