E-type track vulcanizing machine, specialized for producing track type E-type vulcanizing machines

NegotiableUpdate on 03/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

E-type tracked vulcanizing machine

Product Details

E-type track vulcanizing machine, specialized for producing track type E-type vulcanizing machines

Product Name:E-type track vulcanizing machine, specialized for producing track type E-type vulcanizing machines detailed description:

E-type tracked flat vulcanizing machine:

model	XLE-Q1250×2050	XLE-Q1000×1400
Clamping force (MN)	10.0	4.80
Hot plate specification (mm)	1250×2050	1000×1400
Spacing (mm)	450	400
Column diameter	650	450
Maximum working fluid pressure	16	16
Compressed air pressure (Mpa)	0.6-0.8	0.6-0.8
Maximum steam pressure (Mpa)	1.0	1.0
Motor power (kw)	15	5.5
Dimensions: (mm)	1300×800×1500	2500×1400×3300
Weight (kg)	45000	23000

Mainly used for vulcanizing various rubber tracks and flat belts, the structural type is jaw frame plate structure, mainly composed of three parts: main engine, hydraulic system, and electrical control system. It has the advantages of beautiful and elegant appearance, good stability of the whole machine, and easy operation.

(1) Mainly used in the tire retreading industry for tire tread vulcanization molding and other production processes that require high temperature and high pressure rubber product compression molding. The form of compression is upward pressure.

(2) This machine is equipped with high and low pressure oil pumps, which are directly driven by an electric motor. The electric motor is started by a magnetic starter and is equipped with a thermal relay as overload protection. When the electric motor is overloaded or encounters a fault, it will automatically stop working.

(3) The machine is equipped with hydraulic push out/pull in devices on each board.

(4) This machine has functions such as automatic pressure compensation, automatic exhaust, vulcanization digital timer, and automatic mold opening. It can automatically complete a work cycle from "mold pulling in - mold closing up - automatic exhaust - vulcanization timing - mold opening down - product ejection".

(5) The machine is equipped with a manual control device that can open the mold and descend in the event of a power outage.

(6) To ensure the balance of the lifting and lowering of the lower hot plate workbench, a set of synchronous gear mechanisms is installed on the lower front side of the host