Drip irrigation tape plastic particle production line

The new waste drip irrigation belt recycling granulation unit adopts a reliable plastic machine reducer, and the screw adopts 40Cr high-frequency splashing high-strength screw. The improved feeding port design allows for forced feeding regardless of the moisture content in the material port, with good efficiency at low speeds, ensuring uniform propulsion and effective drainage in the feeding section. The melted material undergoes repeated mixing under high compression ratio, resulting in smooth exhaust and increased particle density without pores. This unit is suitable for the recycling and granulation of old and new plastics such as waste drip irrigation belts, PE, PP and other film like, filamentous, hard bottom corner materials. This type of machine adopts dual motors and dual reducers to transmit power and withstand pressure, and operates synchronously with two separate machines. The main unit is specifically responsible for feeding, extrusion, dehydration, and plasticization exhaust, reducing blockage and extrusion load on the filter die. The auxiliary unit is equipped with an electric screen changer head, which is convenient and fast to change the screen. It specializes in compression, filtration, and extrusion after plasticization, which greatly improves the compression ratio and filtration quality, and is not easy to block. The machine adopts infrared quartz tube energy-saving heating ring heating, automatic temperature control, and models such as SJ. The motor of the machine adopts a horizontal four stage rotary motor, and the screw speed is between 57-63r/min. The service life of the screw can reach 500-800t. Our factory is responsible for free on-site installation and commissioning, agency shipping, and free market trends and technical guidance. We welcome people from all walks of life to come and negotiate cooperation.