Double screw plastic granulator 220 type

Double screw plastic granulator220Product Introduction:

1、 Gearbox

1）The deceleration and torque distribution parts are integrated into a compact structure;

2）Needle roller bearings, radial bearings for bearing deceleration torque distribution system

3）The gears are made of high-quality alloy materials, with precision according toISO1328-1995Cylindrical gears are manufactured with precision, and all gears use carburized and quenched hard tooth surfaces. Using specialized gear grinding software to trim the gear profile, ensuring gear strength, uniform tooth load, high strength, low noise, and low vibration;

two.Screw:

1）The screw is a building block structure;

2）Core shaft material:40CrNiMoAThe threaded component is connected to the core shaft in an involute configuration; High strength, large load-bearing capacity, easy disassembly and assembly;

3）The material of the threaded component is high-quality high-speed tool steelW6MO5CR4V2High temperature vacuum quenching heat treatment;

4）Overall hardness:HRC60-64；

5）The connection between the screw head and the cap is a reverse tooth connection to ensure a tight connection.

three.barrel

1）Material:45#Steel is used as the matrix, and the ∞ inner hole adopts high-quality double alloy lining;

2）The first section of the cylinder is the feeding cylinder, the sixth section of the cylinder is the natural exhaust cylinder, and the ninth section of the cylinder is the vacuum pumping cylinder

The remaining cylinder bodies are closed cylinder bodies;

3）The cylinder adopts soft water cooling;

4）The cylinders are connected by high-strength internal hexagonal bolts.

5）Heating section: The feeding area is not heated, while other areas use high-quality cast aluminum heaters.

four.Soft water cooling system

1）Cooling water pump power

2）The soft water pipe is separated from the machine body for easy cleaning and maintenance;

3）Automatic water control solenoid valve, needle valve control;

4）0.55m3Cooler:1The platform.

five. Vacuum pumping system:

1）Vacuum pump;

2）The vacuum water tank is made of stainless steel material;

3）Independent external type, easy to clean and maintain

six.Network switching system

1)Hydraulic blocking automatic screen changing: dual station; Equipped with two porous plates; Including screen changers, hydraulic stations, hydraulic cylinders, etc.

7、 Water bar auxiliary machine:

1）Sink: one, widened and deepened, with a stainless steel tank body;

2）Suction dryer: One unit, with stainless steel material in contact with the material.

3）Cantilever granulator: one, with slip speed regulation; The cutting edge of the pellet cutter is made of tungsten steel material

4）Extended vibrating screen: one unit,L=2.5mThe motor adopts:Vibration specific motor;The vibration level can be adjusted in size:Motor power rate:0.55KWtwo units;The vibrating screen mesh adopts a three-layer separation material;Large hole diameter φ8mmThe diameter of the small hole is φ2.5mmMade of stainless steel and cooled by air cooling;Cooling motor power:0.75kw；

5）Wind blown silo: one set,1m3One storage bin, made of stainless steel material; Using a diameter of130mmStainless steel pipe connection;3kwMaterial conveying fan.

6)One set of host control cabinet;One set of auxiliary control cabinet