DC/3CH/3CV-1200T dual color injection molding machine

DC/3CH/3CV-1200T dual color injection molding machine

Characteristic Description:

Design of a 1.6-point mechanical turntable positioning mechanism to ensure that the turntable positioning never deviates

2. Dual group heart pulling oil circuit, easy to apply

3. Three support mold cylinder design, can be used for monochrome machines, can be changed to single-mode or dual-mode cavities, and used for single and dual color machines

4.6 Electrical turntable fast and slow speed control, easy to operate

5. Adopting an ultra wide guide column spacing design, the mold width is more than 65% larger than other factories, which limits the mold design department and maximizes economic benefits

6. The thickness of the car wall has been specially strengthened (the thickness of the car wall has increased by 1/3 compared to the same industry), and the bending deformation is only within 0.02mm/500mm, which meets international standards

7. The cooling water supply system at the center of the turntable is easy to use, not afraid of breakage or leakage, and avoids accidents

8. The injection system is designed with strong dual injection cylinders, with an injection pressure of over 2700kg/cm2, making it easy to form and suitable for plastic with poor fluidity

9. The screw has anti low temperature start function, screw loosening function to prevent plastic drooling, precision linear slide rail design, and the nozzle does not shake

10. Through computer-aided analysis, it conforms to the new concept of high-tech products

11. Wide rack design for stable operation

12. Humanized sheet metal design, easy to maintain and repair

13. The entire machine is developed and designed using a 3D computer-aided design system

14. Two sets of PUMPs and motors, two sets of pressure flow proportional valves, speed and pressure can be adjusted separately

15. Super large computer screen, easy to operate

16. Self detection and diagnosis of faults, easy warranty

17. Adopting the most advanced human-machine interface controller, it can support customer needs to modify programs

18. Can be connected as a central control system