Customized machine tool protective cover quotation

Steel plate protective coverIt has good sealing, can prevent iron filings, coolant, and accidental accidents of tools.

1.Durable, smooth operation, low noise, and beautiful appearance.

2.The steel plate protective cover is suitable for high-speed machine tool guide rail protection, which is both smooth and free of vibration noise.

3.The steel plate protective cover device not only protects the service life of the protective plate, but more importantly, ensures the precision of the machine tool.

4.Each section of the steel plate protective cover opens and retracts parallel to each other, allowing for smooth operation.

5.The steel plate protective cover will not cause the protective plate to detach, and there will be an impact sound, which is both beautiful and improves the service life of the protective plate.

6.On the basis of the original sealing strip, a layer of stainless steel cover plate was added to prevent iron filings from burning the sealing strip at high temperatures and damaging the guide rail by rubbing it into the track surface.

Steel plate protective coverAdvantages of the device:

1Each protective cover can be activated simultaneously,完quanUnlike the typical one by one pull type of protective cover, the noise is extremely low.
2Using a protective cover for the device can increase its service life.

3The steel plate protective cover device can increase the movement speed of the cover to120m/minAnd withstand higherGValue（2G）.

4The steel plate protective cover device ensures that the cover moves in the same direction and is parallel (avoiding the disadvantage of snake movement in general shear type protective covers).

5At high speeds, it can be smoother without any vibration.

Steel plate protective coverTechnical data：

The steel telescopic guide rail protective cover is of high quality2-3mmThick steel plate is formed by cold pressing, and can also be made of stainless steel according to requirements. Special surface polishing will increase its value. We can provide corresponding guide rail protection types (horizontal, vertical, inclined, horizontal) for all types of machine tools.

The protective cover structure we have developed varies depending on the operating speed and guide rail. running speed10m/minBelow, we have installed polyurethane or brass sliders. medium speed30m/minWe are equipped with rollers below. In addition, a buffer system is required between the drive board, scraper board, and suction board. The purpose of the slider buffer system is to reduce collisions, noise, and friction.

The number of sections of the steel telescopic guide rail protective cover is important for its proportion, weight, and operating characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the ratio of stretching to minimum compression should be between3：1 and5：1between.

Steel plate protective coverStructural selection:

Reasonably priced standard structure（1）Suitable for most application industries, with a width of up to900mmWhen the width is large, it must be folded to improve lateral stability. This is the ridge type（3）And folding edge（4）It can be done. Additionally, inclined type（2）Can effectively make liquids and debris flow away.

The number of sections in a steel telescopic protective cover is important for its proportion, weight, and operational characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the minimum compression ratio for stretching should be3：1and5：1Between (reachable)10：1）.