Chemical process pump - CZ standard chemical process pump

Product Overview:

1、 Performance range of CZ type chemical pump (according to design points)
Flow rate: Q 1.6-1500m3/h
Head: H 5-125m
Work pressure: P is less than or equal to 1.6MPa
Working temperature: t -20 to+150 degrees Celsius

2、 CZ type chemical pump is suitable for industries

Chlor alkali and soda ash industries; Medicine, fertilizers, pesticides; Petrochemical, chemical fiber, paper industry; Dye industry; Environmental engineering and water treatment system.

3、 Structural form of CZ type chemical pump

Horizontal rear opening door structure, pump head and motor connected by coupling, installed on the bottom plate, impeller with rear opening, three bearings, shaft seal with external mechanical seal, equipped with cooling device, bearing body
Observe the oil level with a sight glass; Compact and reasonable structure. The pump has legs cast on the pump body, which can withstand the load from the pipeline and directly transmit it to the foundation, so that the pump rotor will not bend due to the load borne by the pump,
Thus, the load-bearing and mechanical seals have a good service life. When repairing, there is no need to open the pipeline connected to the pump body. Just open the bolts between the bracket and the pump body, and separate them to repair the impeller
And mechanical seal, simple and convenient.
Pump rotation direction: When viewed from the motor end towards the pump, rotate clockwise.

4、 Characteristics of CZ type chemical pump

This series of pumps is developed by our company through the introduction of foreign technology. It can transport media containing solid particles that are prone to crystallization, and is temperature resistant, corrosion-resistant, and non clogging. The material can be selected according to specific working conditions.

5、 Sealing type

Mechanical seal or packing seal.

Product Features:

There are legs cast on the pump body, which can withstand the load from the pipeline and directly transmit it to the foundation. This way, the pump rotor will not bend due to the load borne by the pump, thus ensuring a good service life for the bearing and mechanical seal. When repairing, there is no need to open the pipeline connected to the pump body. Just open the bolts between the bracket and the pump body, separate them, and repair the impeller and mechanical seal, which is simple and convenient

Performance parameters:

Application fields:

Chlor alkali and soda ash industries; Medicine, fertilizers, pesticides; Petrochemical, chemical fiber, paper industry; Dye industry; Environmental engineering and water treatment system.