CG-06 Gas Mass Flow Meter

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Gas mass flow meters have high measurement accuracy, wide application range, and are widely praised by customers. At the same time, it can provide multiple parameter measurements, such as mass flow rate, temperature, density, etc. Widely applicable, the same sensor can be used for measuring multiple media.

Product Details

Characteristics of gas mass flowmeter:

1. No movable parts, low maintenance rate;
2. At the same time, it can provide multiple parameter measurements, such as mass flow rate, temperature, density, etc;
3. Not affected by flow conditions, saving installation design and costs;
4. Widely applicable, the same sensor can be used for measuring multiple media.

The main parameters are shown in the table below:

Measurement accuracy	Level 0.2
Temperature measurement accuracy	±1℃
Zui high flow Kg/min	18
The biggest work pressure	4MPa
fluid temperature	-200℃～200℃
ambient temperature	-50℃～200℃
Specification mm	6
Sensor interface	DN06 flange
Measurement tube material	316L
Explosion-proof rating	Ex ibⅡBT3Gb

Product Structure:

Product installation:

The above data is for reference only, please refer to the user manual for details!

Product cleaning:

As a precision instrument, gas mass flow meters should not be flushed against flowing water. The correct approach is to use a soft cotton cloth to wipe off surface stains. During the wiping process, be careful not to apply too much force to prevent the instrument from breaking. Secondly, it is important to maintain its surface. Sometimes we need to disinfect it, but general disinfection reagents have strong chemical properties and cannot be used. Therefore, alcohol is usually used for disinfection, which can also remove surface dust to a certain extent.