Brand of variable frequency sedimentation tank conveying pump

Sludge is a solid sediment produced during the process of water and wastewater treatment. So the characteristics of this medium are high viscosity, impurities, difficulty in flowing, solid lumps, and water concentration in the sludge. This medium can only be transported by a screw pump.Sedimentation tank transfer pumpAs a manufacturer in the industry, it is a good choice for you.

The working principle is that when the motor drives the pump shaft to rotate, the screw rotates around its own axis on one hand, and on the other hand, it rolls along the inner surface of the liner, thus forming a sealed chamber of the pump. Every time the screw rotates, the liquid in the sealed chamber advances one pitch forward. With the continuous transmission of the screw, the liquid is pressed from one sealing chamber to another in a spiral manner, squeezing out the pump body.

Sedimentation tank transfer pumpThe manufacturer has the following technological advantages:

1. Can transport high concentration, high viscosity<10000 PaS and suspended slurry containing particles.
2. The conveying fluid flow is stable, without overcurrent, pulsation, stirring, or shearing of the slurry.
3. The discharge pressure is independent of the rotational speed, and high discharge pressure can be maintained even at low flow rates.
4. The flow rate is proportional to the speed, and flow regulation can be achieved through a variable speed mechanism or a speed regulating motor.
5. Strong self-priming ability, can directly suck liquid without the need for a bottom valve.
6. The pump can be reversed, and the liquid flow direction is changed by the rotation direction of the pump, which is suitable for situations where the pipeline needs to be flushed in reverse direction.
7. Smooth operation, low vibration and noise.
8. Simple structure, easy disassembly and maintenance.

Generally speaking, a single screw pump can be used as a universal pump, with high or low operating speeds, and the rated outlet pressure of the pump can increase with the number of pump stages. For each additional stage, the pressure increases by 0.6 MPa, making it widely applicable.
Mainly used in the environmental protection industry, including the transportation of industrial wastewater, domestic wastewater, and sewage containing solid particles and short fibers. Especially suitable for oil-water separators, plate and frame filter presses, and other equipment.