Blender production

NegotiableUpdate on 05/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Spiral belt mixer series

Product Details

name	model	function	image
Single screw belt mixer	HS101	Suitable for high viscosity (>100000pp) fluids, usually operated in laminar flow, close to the wall, with a high heat transfer coefficient, and also suitable for surface renewal; The width and pitch of the screw can be adjusted to meet different needs. To prevent mixing dead zones at the elliptical or conical bottom of containers, ribbon mixers are often used in conjunction with anchor mixers.
Double screw belt mixer	HS201	It is generally considered the best impeller for high viscosity, with high mixing efficiency in wall mounted mixers, and is also suitable for heat transfer and solid-liquid mixing on liquid surfaces; The width and pitch of the screw can be adjusted to meet different needs.
Broken double screw mixer	HS201B	A new type of wide viscosity fluid agitator developed by integrating the characteristics of paddle agitator and ribbon agitator. It operates similarly to a paddle agitator at lower viscosities and a ribbon agitator at higher viscosities.
Internal and external single screw mixer	HS202	Suitable for high viscosity fluids (>100000pp), operated under laminar flow, with slightly longer mixing time than double helix. The direction of the inner helix is opposite to that of the outer helix. When the outer helix pushes the material upwards, the inner helix can pull the surface fluid downwards, achieving the circulation function inside the kettle; The heat transfer coefficient is also slightly smaller than that of a double helix stirrer.
Spiral belt screw mixer	HS301	Axial flow propeller, suitable for mixing, heat transfer, and reaction of high viscosity and high solid content materials. Features: low shear, strong cycling ability, ultra-low speed operation, high energy consumption.
Cone shaped ribbon screw mixer	HS301T	Same as HS mixer, suitable for conical containers, smooth discharge of materials.
Internal and external broken screw straps	HS401B	Specially suitable for shear thinning power-law fluids, with a large diameter design and an operating viscosity range of 25000~75000 cp, the rheological index of the operating fluid is 0.1~0.5

Hangzhou Yuanzheng Chemical Engineering Technology Equipment Co., Ltd. is located in Hangzhou National Industrial Development Zone and is a Zhejiang Province enterprise. The company takes solving the "mixing problem" as its entry point and is committed to the technical development, design, and engineering scaling of gas-liquid reactions, polymerization reactions, and high viscosity fluid mixing devices such as liquid-phase catalytic hydrogenation. It also provides customers with solutions and services for gas-liquid and polymerization reactions, including process scaling up, mixing reactors, and supporting control technologies.

In recent years, the company has continued to concentrate its main technical strength on the development, research, and design of special reactors. The newly developed SCM horizontal self-cleaning reactor and single axis self-cleaning reactor have been applied in 5kt/a polysiloxane plant, carbon fiber plant, and polycarbonate plant, providing high-efficiency equipment for the volatilization and defoaming process of high viscosity fluids.

name	model	function	image
marine propeller	SP301	Typical axial flow propeller, suitable for mixing, heat transfer, circulation, solid suspension, dissolution, etc. of low viscosity fluids. Features: low shear, strong cycling, high-speed operation, low energy consumption.
Marine thruster with stabilizing ring	SP301S	The SP301 mixer, equipped with a stabilizing ring, enhances the stability of the mixer during high-speed operation.
Narrow blade curved axial-flow propeller	SP302	Efficient axial flow mixer can achieve larger displacement with the same power. Suitable for mixing, heat transfer, circulation, solid suspension, dissolution, etc. of low to medium viscosity fluids. Features: low shear, strong cycling, medium low speed operation, low energy consumption, small mass, easy to scale up.
Wide blade curved axial-flow propeller	SP303	Axial flow propeller, used for gas-liquid processes; At higher gas velocities, it can better disperse gases and control flow patterns than ordinary axial flow agitators. At the same power consumption, it can increase the mass transfer coefficient by more than 30% compared to traditional radial flow impellers; Its axial flow performance is also sufficient to ensure good solid-liquid suspension at lower power consumption.
Large blade propeller	SP304	High viscosity fluid agitator; Many efficient agitators that can be used in turbulent conditions have significantly reduced efficiency at low Reynolds numbers or high viscosity states, while SP304 does not experience this situation. The special blade design not only reduces procurement costs but also saves operating costs. Compared with other commonly used frame, anchor, screw and other agitators for high viscosity fluids, the mixing time is also shorter.
Self-priming curved propeller	SP305S	A high-efficiency axial flow propeller suitable for low viscosity fluids and solid-liquid suspensions, with a more regular flow pattern than other types of axial flow agitators. Usually used in conjunction with GT101 self-priming agitator, it is used for gas-liquid reactions such as liquid-phase catalytic hydrogenation, oxidation, carbonylation, alkylation, etc.
High solid content arc blade propeller	SP306	Axial flow agitator is suitable for suspensions with high solid content (35%~65%), especially when the suspension has a certain viscosity due to small solid particles; It can also be applied in the presence of a small amount of gas.
Side entry curved blade propeller	SP307	First JinThe side inlet streamlined impeller design can generate jet action, allowing the fluid to quickly reach the opposite inner wall of the container, with high efficiency, large circulation effect, and good mixing and solid-liquid suspension effect.
Power plant axial flow propeller	SP309	The axial flow agitator developed specifically for power plants has an effective fluid dynamics design and can operate in low viscosity (1-2500cp) conditions. It is also used for solid-liquid suspensions with low solid content (0-15%).
Narrow blade curved axial-flow propeller	SP402	Efficient axial flow mixer can achieve larger displacement with the same power. Suitable for mixing, heat transfer, circulation, solid suspension, dissolution, etc. of low to medium viscosity fluids. Features: low shear, strong cycling, medium low speed operation, low energy consumption, small mass, easy to scale up.
Wide blade curved axial-flow propeller	SP403	Axial flow propeller, used for gas-liquid processes; At higher gas velocities, it can better disperse gases and control flow patterns than ordinary axial flow agitators. At the same power consumption, it can increase the mass transfer coefficient by more than 30% compared to traditional radial flow impellers; Its axial flow performance is also sufficient to ensure good solid-liquid suspension at lower power consumption.
Self-priming axial flow propeller	SP405S	A high-efficiency axial flow propeller suitable for low viscosity fluids and solid-liquid suspensions, with a more regular flow pattern than other types of axial flow agitators. Usually used in conjunction with GT101 self-priming agitator, it is used for gas-liquid reactions such as liquid-phase catalytic hydrogenation, oxidation, carbonylation, alkylation, etc.