ATLAS CI4000ATLAS Xenon Lamp Spare Parts Package Long Arc Water Cooled Xenon Lamp

1. Equivalent to OEM lamp tubes

2. 4500W, 6500W, 12000W lamp tubes are equivalent to those used in xenon lamp aging machines

3. Compliant with ASTM, ISO, SAE, AATCC and other standards

4. Light source requirements for photoaging test

5. Fast and timely delivery time

6. Save over 40% of costs

Can replace ATLAS lamps with the same effect.

Precautions

The sharp protrusion at the back of the bulb is the sealing seal of the bulb, which is relatively fragile and must not be hit at that location.

2. Before starting up and during the operation of the light source, it is necessary to ensure that the fan is in working condition. If the fan malfunctions, it is strictly prohibited to start up.

During the operation of the light source, it is prohibited to move it.

During the operation of the light source, do not look directly at the light outlet. If you need to observe the condition of the light spot, be sure to wear protective glasses.

During the operation of the light source, do not touch the surface of the heat sink and filter to avoid burns.

6. Pay attention to the cleanliness of the work environment and avoid small objects falling into the heat dissipation holes above the lightbox.

7. The working current must not exceed 21AMP (Ampere).

When the high-voltage module fails to activate the bulb and light it up multiple times (about 10 times), do not continue to try. Replace the bulb immediately or contact the manufacturer.

9. Do not use bulbs of different models to avoid power damage, malfunction, or explosion.

PLS-SXE300UV has a strong ultraviolet output, and it is necessary to wear UV cutoff protective glasses and UV protective clothing for the experiment. This model of light source will release ozone, and it is necessary to maintain good indoor ventilation or use dedicated ventilation ducts.