What are you truly concerned about when choosing an injection molding machine?
Is it lower unit cost, more stable product quality, shorter delivery cycle, or more worry free factory management?
Yonghua Plastic Machinery deeply understands the real demands of every user and launches the YHE high-speed hybrid series injection molding machine - with "perfect integration of electric and hydraulic" as the technical core, transforming every innovation into perceptible user value, helping you win the initiative in fierce market competition.
Higher quality, making every the first mock examination product trustworthy
The pain points you are facing:
The product has flying edges, black spots, and size fluctuations, resulting in a high scrap rate and continuous customer complaints.
The value brought by YHE:
Plasticized uniformly without impurities:Equipped with fully hard screws and dual alloy barrels as standard, the wear resistance is 5-8 times higher than that of conventional nitride parts. Even with long-term processing of corrosive materials such as fiberglass reinforcement and flame retardancy, it can maintain plasticization stability, eliminate black spots and yellow lines from the source, and ensure consistency between product appearance and performance.
Stable molding without flying edges:Wide template designWiden and thicken the template and optimize the spacing between the pull rods to provide super strong locking rigidity. The template deformation is extremely small, effectively resisting the uneven tension caused by biased injection glue, significantly reducing burrs, and providing protection
moldlife.
Consistent and traceable accuracy:The repeated accuracy of injection position is less than 0.01mmIn conjunction with fully closed-loop intelligent control, real-time monitoring and fine-tuning of key processes such as injection molding and pressure maintenance are carried out to ensure that the size of each product in batch production is highly uniform.
User benefits:Improved product yield, increased customer satisfaction, and enhanced brand reputation.
More efficient, allowing for unrestricted release of production capacity
The pain points you are facing:
Long production cycle, slow equipment response, unable to meet the delivery requirements of large quantities of orders.
The value brought by YHE:
High speed injection, worry free thin-walled:The injection speed can reach up to 500mm/sCombined with high performance
servo motorDrive, respond quickly, and instantly fill complex cavities. Especially suitable for thin-walled and long process products, greatly reducing the molding cycle.
Linkage operation, fully automated production:Mold opening and material storage can be operated in conjunction, and auxiliary machines can be used to achieve fully automated injection molding, resulting in twice the production efficiency compared to ordinary machines.
Quick mold change and intelligent calibration:Intelligent computers support one click automatic mold adjustment and intelligent mold opening, greatly reducing mold replacement and debugging time, making multi variety and small batch production equally efficient.
User benefits: Increased output per unit time, improved order delivery capability, and seizing market opportunities.
Lower cost, making full use of every kilowatt hour of electricity
The pain points you are facing:
Energy consumption remains high, and electricity expenses erode profits, especially during large-scale production where cost pressures are enormous.
The value brought by YHE:
Comprehensive energy saving of 40% -70%:The quantitative pump is driven by a servo motor, and the speed and torque are adjusted in real time according to the actual action requirements, completely eliminating the overflow loss of traditional quantitative pumps.
Energy saving of over 70% in the injection process:The injection and storage actions have been changed to motor-driven, and compared to traditional hydraulic drive, the energy-saving effect is particularly significant in the injection process.
Silent operation, environmentally compliant:The overall noise level is below 75 decibelsCreate a comfortable working environment while meeting the requirements of green factory evaluation.
User benefits: The electricity consumption of a single product has significantly decreased, resulting in substantial annual electricity savings and a significant reduction in long-term operating costs.
More intelligent and convenient, making factory management easy to upgrade
The pain points you are facing:
Relying on the experience of experienced craftsmen, the process debugging is cumbersome, and the equipment status is not visible, which cannot meet the needs of digital management.
The value brought by YHE:
Lowering the operational threshold:The rapid setting of process parameters, automatic mold adjustment, fault self diagnosis and prompt functions greatly reduce the dependence on operator experience, and new employees can also quickly get started.
Industry 4.0 readiness:Supports Ethernet O
PCCommunication protocols such as UA can seamlessly integrate with MES systems to achieve remote monitoring, data collection, and analysis. Production progress, equipment utilization rate, and process parameters are clear at a glance.
Laying the foundation for unmanned workshops:Fully closed-loop intelligent control automatically compensates for process fluctuations, allowing for long-term continuous production without human intervention, laying the foundation for digital factory and unmanned workshop management.
User benefits: improved management efficiency, optimized labor costs, worry free digital transformation and upgrading of factories.
More reliable and durable, ensuring long-term return on investment for equipment
The pain points you are facing:
Frequent equipment failures, high maintenance costs, significant downtime losses, and long investment return cycles.
The value brought by YHE:
Long lifespan of core components:The all hard screw and dual alloy barrel have a wear life 5-8 times longer than conventional nitriding parts, reducing replacement frequency and downtime.
High rigidity structural design:Wide template and optimized pull rod ensure stable operation of the equipment under high loads for a long time, with minimal deformation and wear.
Modular injection mechanism:Independent servo motor drives ball screw, paired with precision linear guide rail, with a simple and reliable structure and easy maintenance.
User benefits: Improved overall equipment efficiency (OEE), reduced lifecycle costs, and more stable investment returns.
The Yonghua YHE series injection molding machine is not just a device, but a comprehensive solution for you to improve quality, efficiency, cost, management, and reliability. The YHE series provides tangible user value to help you: do better, do faster, spend less, manage easier, and use longer.
Exhibition invitation: Witness YHE's strength on site
The Chinaplas 2026 International Rubber and Plastic Exhibition will be grandly held from April 21 to 24, 2026 at the China National Convention and Exhibition Center (Shanghai).
Yonghua Plastic Machinery will showcase its YHE series models at this exhibition, among which YHE138 will stably produce connector products on site with 4-cavity molds and an 18 second molding cycle. We sincerely invite you to visit our booth and witness firsthand the high speed, precision, and stability of the YHE series!
Booth Number: 5.1B35
